Compressor PTFE guide ring, piston ring easy to wear, short service life, the detection analysis and theoretical calculations, based on the comparative test, obtained a better PDFE composite formulation and thermoforming process And open-loop, unloading structure, Guangdong PTFE air compressor piston ring manufacturers have proved through production practice that the new guide ring, piston ring is 10 times longer than the original PDFE ring.
The effect of the width of the PTFE seal: Within a certain range, as the width of the gasket increases, the leak rate decreases linearly. This is because the dielectric leakage resistance is proportional to the length of the leak path (proportional to the width of the shim) within the effective width of the shim. But it can't be said that the wider the gasket, the better. Because the wider the gasket, the larger the surface area of the gasket, so that the same compressive stress is generated on the gasket. The bolt force of the wide PTFE seal is narrower than the fourth. The fluorine seal is much larger.
Quality materials and advanced manufacturing processes are the quality assurance of Teflon tube lining products. Polytetrafluoroethylene products are used in a wide range of applications. Polytetrafluoroethylene products have a wide range of applications. Polytetrafluoroethylene materials have excellent resistance, weather resistance and low permeability. In order to ensure the continuity of the conductivity of the pipelines at both ends of the station, the protected pipelines shall be connected by cables across the strips on the outside of the two flanged polytetrafluoroethylene mats. It is worn in the middle of the protected pipeline with a large current consumption and across the ends of the pipeline. Teflon tube is an engineering plastic with excellent performance. Its chemical corrosion resistance, high and low temperature resistance, electrical insulation, surface non-stickiness, etc. are not as good as many other engineering plastics, so it is called "plastic king".
