The current application range of PTFE gasket seals has become more and more extensive, but it must be very careful when installing. Today, PTFE gasket seal gasket seals, PTFE gasket seals The seal line or sealing surface of the surface should not be damaged. The flat PTFE gasket seal can rely on the upper and lower end faces; the sealing performance of the hydraulic PTFE gasket seal is mainly through the shaft or hole related lip line, which are soft and resilient. Corrosion-resistant, temperature-resistant, and aging-resistant graphite, fiber, rubber, and other special materials that are easily damaged. Therefore, special care must be taken during installation, handling, and storage. Once damaged, it will bring a very large seal. Hidden dangers. There are a lot of small problems in the installation of the workers. In general, it is a big problem. What problems should the PTFE gasket seals pay attention to during the installation process?

The installation of PTFE gasket seals must be symmetrical and balanced. Place the Teflon gasket seal on the lip surface (or effective sealing surface) just as it is installed. After the system is opened for use, it is necessary to continue to observe and do the follow-up work of the PTFE gasket seal. During the installation process, it is forbidden to force the loading too much, which will destroy the original prefabricated structure of our PTFE gasket seals. Therefore, we must be very careful when installing PTFE gasket seals, and the embedding step must be carried out step by step.